Call us. We will schedule one of our crews to out to your facility within days of your phone call.
Please know that this process (both demo and work) will not interrupt your daily operations.
The demonstration is done on 100-150 square foot area.
- We need an electrical outlet 50 feet near the are you choose for your demo
- I would recommend you let us work on your worst- so that you may see the results of this process.
- This is a two step process
- Step 1- requires 3-4 hours of work; we need to let it cure for about 6-8 hours.
- Step 2- the final process is about 3-4 hours.
- If you are satisfied with the end result we can measure your square footage and submit a written proposal
Concrete Polishing Process steps
1. The process starts by removing, pitting, unevenness, existing buildups of glue, adhesives, paint or existing coatings in the concrete surface. This is done by grinding with metal bonded diamonds. All concrete surfacing is diamond leveled and flattened.
2. Because we remove the original concrete seal/ coating, we reapply a densifying concrete seal to stop dusting and harden the floor ( using an impregnating concrete hardener). Several diamond grinds are done in order to prepare the concrete for the polishing steps.
3. Before polishing begins, our liquid chemical densifiers are applied to ensure the concrete floor is hardened and will resist absorption of liquids and eliminate concrete dust once the floor is complete.
4. Finally the multi- step of concrete polishing begins using specialized resin bonded diamonds. These steps gradually increase in finer and finer grades of diamond to ultimately produce desired shine in the floor surface. |
